 |
 |
 |
 |
 |
 |
 |
Features
- Includes:
- 1 Bladder Bag with 3 ounces of synthetic urine (good for up to two uses)
- Velcro Adjustable belt (up to 48" waist)
- 2 Heat Pads
- 1 Temperature Strip
- Complete instructions plus a quick-reference pocket guide
- Up to 1 year shelf life.
- NOTE: Not recommended for random testing since this product will take 30-60 minutes to heat up to the acceptable temperature range.
- Quick Reference Pocket Guide
- Do not microwave!
- Getting it done in 7 easy steps:
- 1. Open up the heat pad and remove the adhesive backing.
- 2. Give the heat pad a couple of good shakes to activate it. Stick the heat pad to the bladder bag, between the belt and fake synthetic urine pouch.
- 3. Wrap the Incognito Belt around your waist (under ALL your clothing) with the temperature strip touching your skin, and the drain tube pointing to the floor.
- 4. Whenever possible, wear the kit for ONE (1) hour prior to your test. The temperate strip MUST read 98°F - 100°F before submitting the sample.
- 5. Close the white clips and cut the end of the tube off.
- 6. GO FOR YOUR TEST! Make sure the temperature is within the specified range. Unfasten the white clips and drain the fake synthetic urine contents into the sample cup.
- 7. Fill specimen cup to the desired level, close the white clips and submit your toxin free sample.
- Remember:
- • Never attempt to microwave the device. Only a few seconds will burst the bag.
- • The temperature of the sample is very important. Always use the supplied heat pad. Make sure the temperature strip on the bladder bag reads 98°F - 100°F when submitting your sample.
- • The heat pad is only good for up to 8 hours. Only use 1 heat pad at a time.
- • The fake synthetic urine bladder bag needs to touch skin to heat up properly.
|
|
 |
 |
 |
 |
|
 |

|